Blog

  The Ideal Magnetic Coupling System for  A2VK Series Chemical Metering Pump Leyuan Magnets’s line of Magnetic Drive Couplers will couple virtually any chemical metering pump used in high or low pressure RIM. The conversion is quick and simple. We looks at the different motor/torque requirements of

How we service our customer, help him to finish his idea and optimize the products to meet the efficient cost. We have received an client enquiry regarding magnet parts, requesting Length of magnet: l.= 80 mm Diameter: d=9 mm Return Force: F=20/30 N Multiple magnetization on the outer diameter

Introducing how Leyuan Magnets making magnetic separation assemblies. We usually use 4 kinds of welding solutions for different kinds of application.  Non Welding   The magnetic tubes are inserted through the stainless steel support plate, but are not welded at the intersections. As such, it is easy

This  assembly is quite hardly made due to their strict tolerances.  The magnet is coated black teflon and a SS304 frame is around it. The difficulty is: 1) There are few planting manufacturer who can coating teflon  for sintered NdFeB magnets. 2)It is impossible to make the

How magnetic tubes works A magnetic tube made of a stainless steel tube, polar plates,end-plugs, and permanent magnets. The higher the surface gauss of the tube, the higher the price. As the permanent magnets being the most expensive parts, we will look into how unscrupulous companies reduce

1. Magnetic properties depend on the dimensions of the magnet, so they can not be like other components designed or set arbitrarily. 2. The upper temperature limit is different for the different magnetic materials. 3. Temperature changes and external fields influence the magnetic stability of the various

One customer needed 2000Gs in a specific area that had a length of 300mm, a width of 240mm and a height of 320mm. Using our calculations and experience, we designed this magnetic assembly for our customer. At the same time, we had to come up with a

Our company collaborated with a laboratory and completed the testing of uniform magnetic field equipment with charged particles. As shown in the figure, the equipment consists of two sections of big block magnets with the following dimensions: 150mmx150mmx38mm, these generate a uniform magnetic field. The attraction between the